We offer strainers established to withstand various pressures and temperature limitations across multiple ANSI pressure classes.

We provide multiple configurations to meet diverse industrial applications:

• 97A – Cone Type: A conical strainer typically used for temporary installation during startup or flushing. Offers low pressure drop and organized debris capture.
• 97B – Basket Type: Provides more open area for filtration and is ideal for applications requiring extended operation prior to cleaning.
• 97C – Plate Type: A flat disc-style screen used in succinct systems where space is limited and flow direction is fixed.

• Y-Strainer
• Basket Strainers
• Temporary Strainers
• Conical Strainers
• Duplex Strainers/Twin Strainers
• Duplex Basket Strainers
• Inline Strainers
• Simplex Strainers

The following is general selection criteria for strainers & filters on the basis of applications, type, flow, pressure, mesh, & standards:

1. Application Purpose

• Most suitable device to protect pumps, valves, meters, heat exchangers, etc.
• Most importantly need for temporary purpose or continuous/permanent operation

2. Strainer Type

• Y-Strainer – Compact, moderate flow, general application
• Basket Strainer – High flow, large debris, Ease for maintenance
• Duplex Strainer – Doesn’t shut/stop working even during cleaning
• Temporary Strainer – Commissioning & flushing

3. Flow & Pressure

• Before Selecting any strainers, match the flow rate to strainer’s Cv or K-factor
• Allowable pressure drop (ΔP): Typically < 5 psi for clean
• Size strainer to avoid performance issues or cavitation

4. Mesh / Filtration

• Coarse: > 1 mm (20–40 mesh)
• Fine: < 100 µm (100–400 mesh)
• Choose based on particle size and equipment working sensitivity

5. Service-Specific Notes

6. Compliance & Standards

• ASME, API, ANSI: Pressure/temperature ratings
• PED, ISO: For international and regulated systems

Accurate installation and maintenance certify long-term correctness and effectiveness:

• Orientation: Install horizontally with the screen pointing downward. For cone strainers, affirm the point faces the flow direction.
• Flow Direction: Forever stick with the flow arrow marked on the body.
• Support & Positioning: Provide sufficient backup to dodge responsibility or vibration.
• Steps for Flushing: Flush pipelines in the formerly initial operation to remove debris and contaminants.
• Inspection: Strainers are for temporary use and should be checked at all times.
• Pressure Monitoring: Vacate or replace when pressure drop exceeds 10 PSI.
• Cleaning Method: Remove and unfill the screen in sum, inspect for damage, and reinstall securely.
• Reinstallation: Use accurate gaskets and torque settings when reinserting into the method.

Our strainers are trusted for diverse fluid and gas processing applications, including:

• Oil & Gas
• Water & Wastewater
• Desalination Plants
• Chemical Processing
• Air & Gas Systems
• Might Generation
• Pulp & Paper
• Marine & Offshore
• Electronics Manufacturing
• Coating and Paint Systems
• HVAC & Equipment Cooling Systems

• ASME-Conforming Designs for safety and consistency
• Custom Configurations to meet unique flow, pressure, and filtration needs
• Multiple MOC options, including CS, SS304, and SS316
• Durable and Reusable Screens with various mesh and perforation options
• Trusted Across Industries including oil, gas, mining, and marine
• Adept Technical Backup for grouping, sizing, and operation guidance